Description: High Pressure Fan are the Centrifugal Fans mainly used for penuamtic conveying of stocks . In grain milling industry it plays an important role for conveying stocks without allowing depositions of dust or stock in the pipe line and supports food safety and hygeine in the mill. Normally HP Fan are used from 550 mm wg to 1050 mm wg in grain milling industry in milling section. Air volume varies from range of 1500 cmh to 12000 cmh in general cases. Back to product page
Volumetric Feeder :
Model
Capacity
Motor/RPM
Driven By
Length
Width
Height
MVF
1-12 T/Hr.
1 H.P.
Frequency Drive
3' - 6"
11"
1' - 9 "
Description:
Volumetric Feeder is an equipment for automisation in process and process control in a contineous process grain milling industry. This allows a fixed and contineous feed rate to the stream and runs at a fixed RPM to cater the need of feed rate. It is upported with a PLC which also allows to change the RPM as may be required to obtain the desired feed rate. Back to product page
Entolator :
Model
Capacity
Motor/RPM
Driven By
Depth
Height
MI 500
1.5 T/Hr.
5 H.P.
3000 R.P.M
Coupled
22"
2' - 7 "
MI 600-1
2.5 T/Hr.
7.5 H.P.
3000 R.P.M
Coupled
26"
2' - 7 "
MI 600-2
3.5 T/Hr.
10 H.P.
3000 R.P.M
Coupled
26"
2' - 7 "
Description: Entolator plays an important role in infestation check and to support shelf life of the ground stock of grains. It kills the larva exists in the stock fed which are the main source for infestation of stock at a rapid speed. Back to product page
Detacher :
Model
Capacity
Motor/RPM
Driven By
Length
Width
Height
MD 300-1
1 T/Hr.
1.5 H.P.
1400 R.P.M
Coupled
2'
1' - 2 "
1' - 9 "
MD 300-2
2 T/Hr.
3 H.P.
1400 R.P.M
Coupled
2'
1' - 2 "
1' - 9 "
Description: Detachers are used in flour milling industry for detaching fibres with the stock and so making stock more clean from fibres. It also helps better gradation in flour milling process. Back to product page
Reverse Pluse Jet Filter :
Description: Reverse Pulse Jet Filter is used with the Aspiration and Pneumatic Conveying system in grain milling industry. The solid laden air are passed through it where air and solids are separated . Solids are collected through filter bags and air passes out. Bags are cleaned automatically by timer control fitted with. Back to product page
Pneumetic small cyclones :
Description: Pneumatic small cyclones are main equipment in the pneumatic conveying system where air and solids are separated. air goes out through Fan and solids are collected through airlocks fitted under the penumatic small cyclones. Back to product page
