Home|Profile|Products|Enquiry|Contact Us


Products ::

Conical Aspirator :

Model Capacity Motor air req. (CMH) Width Height
MCA 500 8 T/Hr.   1350 2' 3' - 10"
MCA 600 12 T/Hr.   2200 2' - 6" 4' - 3"
MCA 800 20 T/Hr. 2 H.P. 4200 3' - 2" 6' - 4"
Description:
This is an equipment to support efficient aspiration of light particles and light weight fibres from the product stream. It is a proven aspiration equipment for removal of fibres from the broken maize/corn stream and ground corn stream. This type of aspirator is recomended for maize grit and maize flour plants.
Back to product page

Elevator :

Description:
Elevator is also an conveying equipmentfor vertical conveying. In grain milling industry, elevators are used in cleaning section for vertical conveying because it consumes less power than a pneumatic conveying system.
Back to product page

8 Feed Plantshifter :

Model type sieve width
x length
Capacity
Air m3/min
Motor Rpm Driven By Length Width Height
MPS 816 8 Feed 500mm x 500mm x Per Seive-Feed Vary on Material 5 HP flange 960 RPM Pully 10' - 2 " 6' 12' - 6"
Description:
Planshifter are the flow grader for online product stream. It is useful for multi gradation in one pass. The Feed or section of feed are normally ranged from two to ten. It allows in one machine to inlet feed of diverse category of stream for gradation. In one section of feed normally four to six types/ grades are separated online of flow.
Back to product page

Roller Mill :

Model Capacity Motor/RPM Driven By Length Width Height
MCRM Vary on Material 10-25 H.P. x2 960 RPM Pully 6' - 8 " 4' - 6 " 5' - 4 "
Description:
Roller Mills are normally used in flour milling industry as rinding media. This is most desired grinding media in a grain milling industry. Normally four roller mills are used which has four nos. of rollers in two sides. Two nos. of rollers make one set to gring the stock so two sides allows grinding two types of stock in one roller mill.
Back to product page

Viberatory Bran Finisher :

Model type Capacity Motor / Rpm Driven By Length Width Height
MBF Vibratory 500 kg/Hr l 2 H.P. 1440 RPM Pully 4' - 7" 1' - 8" 4'

Description:

Fibre sticked / laden ground stock are required to get fibres removed and to get separated from the fibres. Bran finishers do both detach fibres from ground stock and also grade the stock by throughs and overtails to collect seperately. Fibres being of very light in weight requires a vibration to move and so vibratory bran finishers are most suitable for purpose.

Back to product page

Vibro Purifier :

Model type sieve width
x length
Capacity
Air m3/min
Motor Rpm Driven By Length Width Height
MVP 750 8 T/Hr. 3 H.P.
960 R.P.M
Vary on Material Vibro Motor 1 HP x 2 960 RPM 9' - 6 " 5' - 2" 5' - 3 "
Description:
Purifier is most important machine to play the role in purification of main stock of semolina and middlings from fibres. In a flour milling industry fibres are not desired to pass or to go with flour or semolina. This is an efficient machine for purification of such stock from fibres. It requires an aspiration system to be attached with the machine.
Back to product page

Page :-   1   2   3   4   5   6   7

Home|Profile|Products|Enquiry|Contact Us

© Mahashakti Engineering Works. 2009 All Right Reserved
Site Designed By LEE & NEE Softwares (E) Ltd
Valid XHTML 1.0 Transitional   Valid CSS!